'06 is really CPU limited with these cards, you may want to give Vantage a go
| MysteryByte Computers http://mysterybyte.com/phpBB3/ |
|
| 4870X2 /W E8400 3dmark poor http://mysterybyte.com/phpBB3/viewtopic.php?f=13&t=994 |
Page 1 of 2 |
| Author: | Topsecret66 [ Tue Sep 16, 2008 10:29 am ] |
| Post subject: | 4870X2 /W E8400 3dmark poor |
Does this sound right @ stock settings? P5N-T Deluxe Gskill 1066 5-5-5-15 4870X2 E8400 Stock @ 3.0 Ghz 700W PSU Rocketfish 15500 3dmarks Everything is , like said. Stock. |
|
| Author: | Dr_BenD_over [ Tue Sep 16, 2008 10:49 am ] |
| Post subject: | |
Here's mine at 3.0 but with a Quad, the SM 2.0 and 3.0 scores should be about the same. http://service.futuremark.com/compare?3dm06=7827629 |
|
| Author: | Topsecret66 [ Tue Sep 16, 2008 11:08 am ] |
| Post subject: | |
SM'S are the same and quad utilizes a bit better so I would imagine that makes sense and is normal then. cool ill have to do some OCing to prevent BNecking. FarK |
|
| Author: | Dr_BenD_over [ Tue Sep 16, 2008 11:11 am ] |
| Post subject: | |
'06 is really CPU limited with these cards, you may want to give Vantage a go
|
|
| Author: | Topsecret66 [ Tue Sep 16, 2008 11:37 am ] |
| Post subject: | |
Most likely , yes. I mean with my 2x 8800's. I hit 19500. But that was OC to 4.0 Ghz. So maybe after class i'll OC and post my 3d. Thanks Dr. |
|
| Author: | ronedogg [ Tue Sep 16, 2008 2:25 pm ] |
| Post subject: | |
oc the proc. i notice a huge difference from my q6600 at stock and when i oc it with my 3d mark scores. grain about 5000 points |
|
| Author: | Topsecret66 [ Tue Sep 16, 2008 2:28 pm ] |
| Post subject: | |
yeh. like said i went from 14500 to 19500 when i OC'd from 3 to 4ghz. Ill try it when i get home. I just reseated my shit so mabe i can temp down a bit. |
|
| Author: | ronedogg [ Tue Sep 16, 2008 3:58 pm ] |
| Post subject: | |
good luck man u should get an impressive mark. ill have a benchmark for yas here soon. skulltrail 
2x gtx280s sli for a hint.be a few more weeks before its all put togather and i get all my parts |
|
| Author: | Topsecret66 [ Tue Sep 16, 2008 4:14 pm ] |
| Post subject: | |
19673 3dmarks sm 2.0: 8817 sm 3.0: 10794 cpu: 3713 Stable? I'm not sure... Rone and I know the p5nt deluxe is full of shit when it reads vcores.. But the true im running at is 1.392vcore. Temps are 44 idle, Load was 54-56 @ 100% |
|
| Author: | ronedogg [ Tue Sep 16, 2008 4:25 pm ] |
| Post subject: | |
yeah this board lies like a cheep rug |
|
| Author: | Topsecret66 [ Tue Sep 16, 2008 4:53 pm ] |
| Post subject: | |
CPU: E8400 3.0Ghz OC'd 4.21Ghz AIR Vcore: 1.456v Ram: Gskill 1066 5-5-5-15 to: 2.2V 1055@ 6-6-6-18 4870X2@ Stock settings and Clocks 3D Marks: 20149 SM 2.0: 9029 SM 3.0: 11003 CPU Score: 3825 If anyone has good knowledge on OCing the 4878 (AHEM Dr Ben) lemme know please! Topsecret66server@live.com <--msn |
|
| Author: | Dr_BenD_over [ Tue Sep 16, 2008 4:59 pm ] |
| Post subject: | |
I'm not OC'ing mine until there is a better method of fan control, or a water block that'll fit it. |
|
| Author: | Topsecret66 [ Tue Sep 16, 2008 4:59 pm ] |
| Post subject: | |
Fig'd lol. Does run to hot as it is heh |
|
| Author: | Topsecret66 [ Tue Sep 16, 2008 5:00 pm ] |
| Post subject: | |
Tools for fan control? |
|
| Author: | Topsecret66 [ Tue Sep 16, 2008 5:16 pm ] |
| Post subject: | |
Rivatuner 2.10 Got it 
|
|
| Page 1 of 2 | All times are UTC - 4 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|