MysteryByte Computers
http://mysterybyte.com/phpBB3/

new rig
http://mysterybyte.com/phpBB3/viewtopic.php?f=15&t=1859		 Page 1 of 1
Author:  ronedogg [ Sat Nov 14, 2009 11:35 am ]
Post subject:  new rig
here is how its looking rite now. going to pick up 790i mother board in next day or 2. so its gonna change again.

specs are:

p5q mother board
2x2gb ddr2 1066
enermax 1000w psu
q9550 @ 4.08 ghz stable
gtx 260
xfi xtreme gamer
2x intel x25 160gb ssd raid0
2x 1tb seagate 32mb cache hdds raid0

water cooling:

2x laing pumps with custom acrylic tops
PA 120.2 rad in front
swiftech 240mm rad in back
d-tek cpu water block
swiftech mcw30 nb block
ek sb block
full cover gtx260 water block
2x aphacool vreg water blocks
2x danger den 5 1/4 drive bay reservoir

soon to be added:

heat exchange plate with ice water running on 3rd loop external hooked into both loops to drop temps another 10-20c leave more room for over clocking

xfx 790i ultra mother board
8gb ddr 1066

1 or 2 more gtx260s

Image
Author:  maverick_brent [ Mon Nov 16, 2009 6:20 am ]
Post subject:  Re: new rig
nice setup, wwires need a bit of managment...:P but looks puuurrrddyy...
Author:  ronedogg [ Wed Nov 18, 2009 9:51 am ]
Post subject:  Re: new rig
ya that was a quick job i was waiting for my new mother board to get in. shes all setup now with clean wires lol.
i bought a xfx 790i ultra and 8 gb ddr3 1600.
i will post a updated pic soon.
MORE WATER PARTS FOR SALE ASWELL
nb blocks sb blocks. i decided not to rip the stock coolers off the board. and i will be takin it easy on water cooling. just cooling cpu and gpu
Author:  ronedogg [ Wed Dec 02, 2009 5:33 pm ]
Post subject:  Re: new rig
here it is. all cleaned up

broken foot nothing better to do but take pics of the pc for now lol

and as you can see i still cannot master the canon rebel xti slr camera XD

Image
Author:  Flama22 [ Thu Dec 03, 2009 9:40 am ]
Post subject:  Re: new rig
ronedogg wrote:
and as you can see i still cannot master the canon rebel xti slr camera XD


Low light shots are always a problem. Your best bet is to get a tripod and press the shutter gently. 8)
Author:  ronedogg [ Thu Dec 03, 2009 4:57 pm ]
Post subject:  Re: new rig
lol it is on a tripod loool
i will get the wife to take a pic later she seems to know how to use this camera better then i do
more parts coming in the mail next week. i have a second video card coming with full cover water block. some more lights. and the rest of my custom made water blocks from viper jon.
i am also going to be customizing case abit to retrofit a PA 120.2 240mm radiator inside where the large fan is on top. when they designed these cases they left a huge cavity up top that is almost useless without some major modifications.

ALSO
anyone with a Mozart that would be willing to sell or trade. let me know.
Author:  ronedogg [ Fri Jan 08, 2010 5:42 pm ]
Post subject:  Re: new rig
This weekend i will be installing ALL my 790i water blocks i got in the mail from EK. 2 vcore blocks 1 sb and one sb block made for the evga and xfx 790i motherboards.

here is what the new build consists of.

2 x 6 fan controllers 40w per channel for a total of 12 fans

2 x cable sleeving kits from murder mod

slim slot load dvd burner for laptop with adapter for sata. and custom made 5.25" cover to blend in with front mesh on case

second gtx260 video card

bran new dremel with large enforced cutting disks

2 rolls of blue painters tape

24x24 piece of wire mesh matching the mesh stock on the antec 1200 cases. im going to be customizing the top of my case to fit a pa 120.2 radiator. not exactly sure how this is going to go until i get the case all apart.

2x led switches for the uv lights in the case

12 x yateloon blue led fans 2500rpm. 3 in front 4 in back on first radiator, 4 ontop on second radiator. and one on the door.

12 x bits power compression fittings

2 rolls of 3M 4010 mounting tape

pack of 100 black 4 inch zip ties



the build is gonna begin early tomorrow morning. I will post up some pics of the build if i remember, if not i will be sure to get some up when its all finished. I am hoping to get this ALL done in one day. but it will probably lead into 2 days. I hate sleeving wires.
Those power supply tool kits for removing molex and 24 pin motherboard connectors are junk. I bought 2 of them so far and neither of them do as good of a job as my small screw driver and a safety pin lol
Author:  Hali_Newf [ Fri Jan 08, 2010 5:46 pm ]
Post subject:  Re: new rig
post some photos of all the gear and take regular breaks and use the time to snap some shots as ya go !
Author:  ronedogg [ Fri Jan 08, 2010 5:53 pm ]
Post subject:  Re: new rig
Yeah im gonna try to illustrate this whole build. When I am ready to get started I will try to take pics every 20 30 mins I decide to take a break show progress. I think I said I would do this before but I forgot and just got straight into business lol.

This IS my last build till I get back in September from Texas, probably going to jump to i7 by then. Maybe not, skull trail is becoming more and more affordable these days.
Author:  ronedogg [ Sun Jan 10, 2010 2:29 pm ]
Post subject:  Re: new rig
build post pone till later this week. stuff came up :/
Author:  ronedogg [ Sat Jan 16, 2010 4:53 am ]
Post subject:  Re: new rig
all done. 3:52 am. started at 2 pm :S

i didn't take pics as i said i would but i got finished pics. i will post them up tomorrow.
Author:  ronedogg [ Mon Jan 18, 2010 2:45 pm ]
Post subject:  Re: new rig
here are the pics. damn wifes canon rebel xti camera is more complicated then building this computer lol sorry for fuzzy pics
pc came out quite nice if i do say so. running about 5c cooler now too.
Next is to cut door to make window bigger. or i may just order the pre made door.

Image
Image
Image
Image
Page 1 of 1 All times are UTC - 4 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/