MysteryByte Computers http://mysterybyte.com/phpBB3/ |
|
Corsair Airflow Pro http://mysterybyte.com/phpBB3/viewtopic.php?f=26&t=2356 |
Page 1 of 1 |
Author: | CMDR Steve-O [ Tue Jun 01, 2010 9:45 am ] |
Post subject: | Corsair Airflow Pro |
Sexy http://blog.corsair.com/?p=2983 |
Author: | Hali_Newf [ Tue Jun 01, 2010 10:01 am ] |
Post subject: | Re: Corsair Airflow Pro |
That's awesome. Wonder what the cost is. I would really wanna pick one up if the $$ is right. |
Author: | CMDR Steve-O [ Tue Jun 01, 2010 11:32 am ] |
Post subject: | Re: Corsair Airflow Pro |
It only works with uber high end Corsair ram though heh. Although I'm sure you have some of them heh. |
Author: | Hali_Newf [ Tue Jun 01, 2010 11:34 am ] |
Post subject: | Re: Corsair Airflow Pro |
not really. I'm using XMS3 DDR3-1600Mhz ...and another 2G stick by OCZ I picked up at a wicked deal from Denty. It has the same specs and works together with the Corsair flawlessly. So I figured why not run 6Gigs instead of four |
Author: | CMDR Steve-O [ Tue Jun 01, 2010 1:44 pm ] |
Post subject: | Re: Corsair Airflow Pro |
The LEDs only work with a couple types of memory. Corsair does make an airflow thingy without the LEDs, though. |
Author: | CMDR Steve-O [ Wed Jun 02, 2010 7:40 am ] |
Post subject: | Re: Corsair Airflow Pro |
http://semiaccurate.com/2010/06/01/corsair-launches-graphite-600t-case-computex/ And some more Corsair goodies from Computex. |
Author: | Hali_Newf [ Wed Jun 02, 2010 9:24 am ] |
Post subject: | Re: Corsair Airflow Pro |
Very nice clean looking case. Internal cable management capability looks to be impeccable. I would opt for a clear side panel and maybe a side mounted fan with dust filter - or - A mount for a 120/140mm fan on the case floor with an external dust filter that you can remove clean and pop back in place ( on the outside) without having to remove anything. It has become a bit of a pet peev as the Antec 900v2 has them but a pain in the rear to remove easily. I smell a new case in the near future. sniff sniff |
Author: | Dr_BenD_over [ Thu Jun 03, 2010 10:37 am ] |
Post subject: | Re: Corsair Airflow Pro |
Depending on the price, that case might just be in my future. |
Author: | CMDR Steve-O [ Thu Jun 03, 2010 11:09 am ] | ||
Post subject: | Re: Corsair Airflow Pro | ||
Hali_Newf wrote: Very nice clean looking case. Internal cable management capability looks to be impeccable. Of course any case would look that clean...WHEN THERE ARE NO CABLES!
|
Author: | Hali_Newf [ Thu Jun 03, 2010 1:18 pm ] |
Post subject: | Re: Corsair Airflow Pro |
I seen that photo and seen there were no cables on the video card, no hdd's or optical drives installed and such ( properly installed) - however the holes for cable routing would offer up routing capability comparable to the 800D. Sorry for the confusion, thats really what I meant by the last postaroo. hmm how much are those @ MB I wonder |
Author: | CMDR Steve-O [ Thu Jun 03, 2010 1:24 pm ] |
Post subject: | Re: Corsair Airflow Pro |
That's just a case at Computex so it'll be a few months yet. |
Author: | Hali_Newf [ Thu Jun 03, 2010 1:36 pm ] |
Post subject: | Re: Corsair Airflow Pro |
Why didn't Antec with the v2 offer up the drive bays mounted sideways like that lol woulda made the case easier to work on and made better use of the limited room. Ah well, I am considering the CM690II advanced for my next case |
Author: | Dr_BenD_over [ Thu Jun 03, 2010 2:10 pm ] |
Post subject: | Re: Corsair Airflow Pro |
CMDR Steve-O wrote: Hali_Newf wrote: Very nice clean looking case. Internal cable management capability looks to be impeccable. Of course any case would look that clean...WHEN THERE ARE NO CABLES! It's got those new fangled wireless cables |
Page 1 of 1 | All times are UTC - 4 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |