Shouldn't be too hard. You should see if you can find that guy's project log. If we can't find it, I'll either have to come look at the case first, or you can crack'er open to find out exactly what size the LED's are.

Probably 5mm, but they might be smaller... And are they glued in? How much voltage is being sent to them?

The soldering isn't a problem, its making sure you have compatible replacements, or the parts/tools to make them work.

Or you can just give me your case for a day or two. I'll do all the hard work, pick up the LEDs, swap'em out and pretty it up for ya.

Send me a PM and we'll work out the details.

Well, I found his project log. Not very descriptive... But it sounds easier than I thought. Hardest part will be picking up the LEDs.

So would you be able to do this for me magicman? I e-mailed Silverstone support and asked what size the LED's were so i know which ones to order and I have yet to get a response

If you get all the parts together, I can do the soldering no problem.

Alright, I will let you know when I get the LED's. About how much $ are you looking for to do it?

$20 to drive to Tantallon and back should do it. Doing the work while I'm there of course.