hey i just installed my water cooling kit im my pc. i forgot to install pc probe before the install so i have no idea what my temps were.
but anyways i installed pc probe and it imedetely started giveing me a warning my MB was at 45c so i shut the computer off and here i am now. my cpu was idle around 42c

so what is normal my main board is a m2n-2 sli and my proc is a sam2 4200+ x2 with a 10% oc

with any water cooling setup it is still important to have case fans to move at least some of the air out of the case.
did you change the stock northbridge cooler at all?
also, sometimes the system temperatures aren't read properly by different programs depending on the age of the program and the age of your bios.

the case is a thermal take bach media lab. it has 1 80mm intake and 2 smaller out take fans. my board is a m2n-e sli and has a big old north bridge cooler on it. but it is stock. mabye ill see what mb can order me in for a water coool northbridge cooler

also was up messing aruond with comptuer still with fan position and what not. and now i got no load 33-35c for the cpu, for the mb around 40-44 with no load, and with loads the cpu gets to about 41c and the mb around 47
are these temps fine

my general rule of thumb is anything under 50 and stable for the CPU and northbridge is fine.

ok cooool. thanks monekydee for the help. i was worried for abit